{"id":10721,"date":"2026-08-04T04:30:12","date_gmt":"2026-08-04T02:30:12","guid":{"rendered":"https:\/\/gjergjihtextil.com\/key-textile-performance-indicators\/"},"modified":"2026-08-04T04:30:12","modified_gmt":"2026-08-04T02:30:12","slug":"key-textile-performance-indicators","status":"publish","type":"post","link":"https:\/\/gjergjihtextil.com\/en\/key-textile-performance-indicators\/","title":{"rendered":"Key Textile Performance Indicators for Hospitality Procurement"},"content":{"rendered":"<\/p>\n<p>Six product-level performance indicators determine whether a hospitality textile survives its expected service life or fails early: abrasion resistance (tested via Martindale or Wyzenbeek), colorfastness (to washing, light, and crocking), pilling resistance, dimensional stability and shrinkage, fabric weight and tensile\/seam strength (GSM and tensile), and laundering performance with absorbency for towels and linens. For each one, request independent lab reports referencing <a href=\"https:\/\/www.aatcc.org\/standards\/\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">AATCC<\/a>, ASTM, or ISO method numbers \u2014 not vendor summaries \u2014 before issuing a purchase order.<\/p>\n<ul>\n<li><strong>Abrasion resistance:<\/strong> Martindale (rub cycles to appearance change) or Wyzenbeek (double rubs); request the test method, specimen construction, and numeric result.<\/li>\n<li><strong>Colorfastness:<\/strong> AATCC TM61 (laundering), TM165 (crocking), TM188 (bleach); minimum Grade 4 or better for wash and crocking in most hospitality applications.<\/li>\n<li><strong>Pilling resistance:<\/strong> ASTM D3512 or ISO 12945; Good pilling resistance for guest-contact surfaces.<\/li>\n<li><strong>Dimensional stability\/shrinkage:<\/strong> AATCC TM135 or ISO 6330; specify maximum percentage change after a defined number of industrial wash cycles.<\/li>\n<li><strong>Fabric weight and tensile\/seam strength:<\/strong> GSM (grams per square meter) and ASTM D5034\/D1683; set minimums per end use.<\/li>\n<li><strong>Laundering performance and absorbency:<\/strong> accelerated wash-cycle data showing appearance retention; AATCC TM79 for absorbency on terry\/spa linens.<\/li>\n<\/ul>\n<p><strong>Pro Tip:<\/strong> <em>Always ask for the full test certificate, not a summary PDF. A one-page \u201cpassed\u201d document with no specimen construction details is not procurement-grade evidence.<\/em><\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ul>\n<li><a href=\"#what-do-key-textile-performance-indicators-actually-measure\">What do key textile performance indicators actually measure?<\/a><\/li>\n<li><a href=\"#how-do-zone-based-targets-translate-kpi-numbers-into-real-specs\">How do zone-based targets translate KPI numbers into real specs?<\/a><\/li>\n<li><a href=\"#how-do-you-verify-what-a-supplier-actually-claims\">How do you verify what a supplier actually claims?<\/a><\/li>\n<li><a href=\"#how-does-laundering-chemistry-change-what-you-should-specify\">How does laundering chemistry change what you should specify?<\/a><\/li>\n<li><a href=\"#how-gjergjihtextil-applies-these-kpis-in-hospitality-supply-programs\">How Gjergjihtextil applies these KPIs in hospitality supply programs<\/a><\/li>\n<li><a href=\"#printable-specification-checklist-for-rfqs-and-contracts\">Printable specification checklist for RFQs and contracts<\/a><\/li>\n<li><a href=\"#key-takeaways\">Key Takeaways<\/a><\/li>\n<li><a href=\"#the-case-for-specifying-visual-service-life-not-structural-failure\">The case for specifying visual service life, not structural failure<\/a><\/li>\n<li><a href=\"#gjergjihtextils-kpi-backed-sourcing-and-specification-support\">Gjergjihtextil\u2019s KPI-backed sourcing and specification support<\/a><\/li>\n<li><a href=\"#useful-sources-and-testing-bodies\">Useful sources and testing bodies<\/a><\/li>\n<\/ul>\n<h2 id=\"what-do-key-textile-performance-indicators-actually-measure\">What do key textile performance indicators actually measure?<\/h2>\n<p>The phrase \u201ckey textile performance indicators\u201d is widely used but rarely defined precisely in procurement contexts. The industry standard terminology is <em>product-level performance metrics<\/em> \u2014 measurable, test-method-backed values that predict how a fabric will behave under real hospitality conditions: repeated laundering, guest contact, UV exposure, and chemical cleaning. The table below maps each indicator to its test standard, hospitality relevance, and the documentation you should request.<\/p>\n<table>\n<thead>\n<tr>\n<th>Indicator<\/th>\n<th>What it measures<\/th>\n<th>Test standard(s)<\/th>\n<th>Why it matters for hospitality<\/th>\n<th>Documentation to request<\/th>\n<th>Suggested target<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Abrasion resistance<\/td>\n<td>Surface wear to appearance change<\/td>\n<td>Martindale (ISO 12947) \/ Wyzenbeek (ASTM D4157)<\/td>\n<td>Predicts visual service life in seating, headboards, public areas<\/td>\n<td>Full Martindale\/Wyzenbeek certificate with specimen construction<\/td>\n<td>Lobby: high Martindale resistance; restaurant\/bar: robust Martindale resistance<\/td>\n<\/tr>\n<tr>\n<td>Colorfastness to washing<\/td>\n<td>Color loss after laundering<\/td>\n<td>AATCC TM61<\/td>\n<td>Appearance retention after industrial cycles<\/td>\n<td>Lab report with grade per colorway<\/td>\n<td>Grade 4 or better<\/td>\n<\/tr>\n<tr>\n<td>Colorfastness to crocking<\/td>\n<td>Color transfer by rubbing<\/td>\n<td>AATCC TM165<\/td>\n<td>Prevents dye transfer to guest clothing<\/td>\n<td>Lab report, wet and dry<\/td>\n<td>Grade 4 or better<\/td>\n<\/tr>\n<tr>\n<td>Colorfastness to light<\/td>\n<td>Fading under UV\/sunlight<\/td>\n<td>ISO 105-B02<\/td>\n<td>Critical for curtains, south\/west-facing rooms<\/td>\n<td>Certificate per colorway<\/td>\n<td>Grade 5 or better standard; higher grades for high-sun exposure<\/td>\n<\/tr>\n<tr>\n<td>Pilling resistance<\/td>\n<td>Fiber balling on surface<\/td>\n<td>ASTM D3512 \/ ISO 12945<\/td>\n<td>Guest perception of fabric age<\/td>\n<td>Lab report with grade<\/td>\n<td>good pilling resistance minimum<\/td>\n<\/tr>\n<tr>\n<td>Dimensional stability<\/td>\n<td>Shrinkage after laundering<\/td>\n<td>AATCC TM135 \/ ISO 6330<\/td>\n<td>Fit retention for fitted linens and upholstery<\/td>\n<td>Wash-cycle shrinkage data<\/td>\n<td>a slight dimensional change after specified cycles<\/td>\n<\/tr>\n<tr>\n<td>GSM and tensile\/seam strength<\/td>\n<td>Fabric weight and structural integrity<\/td>\n<td>ASTM D3776 (GSM) \/ ASTM D5034 \/ D1683<\/td>\n<td>Determines durability and seam failure risk<\/td>\n<td>Full tensile and seam strength report<\/td>\n<td>Per end-use minimum; confirm with supplier<\/td>\n<\/tr>\n<tr>\n<td>Absorbency (terry\/spa)<\/td>\n<td>Water pickup rate and capacity<\/td>\n<td>AATCC TM79<\/td>\n<td>Core function of towels and spa linens<\/td>\n<td>Absorbency test report<\/td>\n<td>Sink time \u226410 seconds per AATCC TM79<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><a href=\"https:\/\/gjergjihtextil.com\/en\/textile-fabric-testing-quality-hotels-restaurants\" target=\"_blank\" rel=\"noopener\">Fabric testing for hospitality<\/a> covers how to read these reports and what the numeric grades mean in practice.<\/p>\n<p><strong>Pro Tip:<\/strong> <em>Martindale is the preferred method for woven upholstery and curtain fabrics; Wyzenbeek is more common for flat-woven contract fabrics in U.S. specifications. If your supplier quotes only one, ask why \u2014 and request both when the fabric will be used across multiple zones.<\/em><\/p>\n<h2 id=\"how-do-zone-based-targets-translate-kpi-numbers-into-real-specs\">How do zone-based targets translate KPI numbers into real specs?<\/h2>\n<p>A lobby chair and a guest-room headboard face completely different wear profiles. KOTHEA\u2019s hotel fabric specification guidance recommends high Martindale resistance for continuous-use lobbies and robust Martindale resistance for restaurant and bar seating, with a minimum Martindale resistance for headboards paired with a stain-resistant finish. These are appearance-driven targets, not structural-failure minimums.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/csuxjmfbwmkxiegfpljm.supabase.co\/storage\/v1\/object\/public\/blog-images\/organization-24860\/1785600569177_Procurement-team-reviewing-fabric-samples.jpeg\" alt=\"Procurement team reviewing fabric samples\"><\/p>\n<table>\n<thead>\n<tr>\n<th>Zone<\/th>\n<th>Abrasion (Martindale)<\/th>\n<th>Colorfastness (wash\/crock)<\/th>\n<th>Pilling<\/th>\n<th>Shrinkage<\/th>\n<th>Laundering cycles<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Lobby\/lounge seating<\/td>\n<td>80,000\u2013100,000<\/td>\n<td>Grade 4 or better<\/td>\n<td>Grade 4 or better<\/td>\n<td>N\/A (upholstery)<\/td>\n<td>N\/A<\/td>\n<\/tr>\n<tr>\n<td>Restaurant\/bar seating<\/td>\n<td>60,000\u201380,000<\/td>\n<td>Grade 4 or better<\/td>\n<td>good pilling resistance<\/td>\n<td>N\/A<\/td>\n<td>N\/A<\/td>\n<\/tr>\n<tr>\n<td>Guest room seating<\/td>\n<td>80,000<\/td>\n<td>Grade 4 or better<\/td>\n<td>good pilling resistance<\/td>\n<td>N\/A<\/td>\n<td>N\/A<\/td>\n<\/tr>\n<tr>\n<td>Headboards<\/td>\n<td>25,000 minimum with stain-resistant finish<\/td>\n<td>Grade 4 or better<\/td>\n<td>good pilling resistance<\/td>\n<td>N\/A<\/td>\n<td>N\/A<\/td>\n<\/tr>\n<tr>\n<td>Bed linens<\/td>\n<td>N\/A<\/td>\n<td>Grade 4 or better (wash)<\/td>\n<td>good pilling resistance<\/td>\n<td>a slight dimensional change<\/td>\n<td>200+ industrial cycles<\/td>\n<\/tr>\n<tr>\n<td>Towels\/spa linens<\/td>\n<td>N\/A<\/td>\n<td>Grade 4 or better (wash\/crock)<\/td>\n<td>N\/A<\/td>\n<td>a slight dimensional change<\/td>\n<td>200+ industrial cycles<\/td>\n<\/tr>\n<tr>\n<td>Curtains<\/td>\n<td>N\/A<\/td>\n<td>ISO 105-B02 Grade 5 or better<\/td>\n<td>N\/A<\/td>\n<td>\u22642%<\/td>\n<td>N\/A<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>For luxury properties or long refurbishment cycles (five years or more), add a 20\u201325% margin to abrasion targets. A fabric specified at 80,000\u2013100,000 Martindale for a standard lobby should be specified at 100,000 for a luxury property with a long refurbishment cycle.<\/p>\n<ul>\n<li>For <strong>phased projects<\/strong>, reserve dye lots at contract stage and retain first-delivery control samples. Visible color mismatches between room batches completed months apart are one of the most common and most avoidable procurement failures.<\/li>\n<li>For <strong>dining textiles<\/strong>, <a href=\"https:\/\/gjergjihtextil.com\/textiles-for-restaurants\" target=\"_blank\" rel=\"noopener\">restaurant tablecloth and napkin specs<\/a> should include colorfastness to crocking (wet and dry) and shrinkage tolerance, since table linens are laundered daily.<\/li>\n<\/ul>\n<p><strong>Pro Tip:<\/strong> <em>For south- or west-facing rooms and atrium spaces, specify ISO 105-B02 higher grade for curtain fabrics exposed to intense sunlight. Grade 5 is a reasonable baseline for mixed orientations, but high-sun exposure accelerates fading faster than most standard test cycles predict.<\/em><\/p>\n<h2 id=\"how-do-you-verify-what-a-supplier-actually-claims\">How do you verify what a supplier actually claims?<\/h2>\n<p>Supplier claims without independent lab evidence are not specifications \u2014 they are marketing. Here is the verification sequence that protects procurement sign-off.<\/p>\n<ol>\n<li><strong>Request full independent lab test reports<\/strong> \u2014 not vendor-produced summaries. Each report must reference the AATCC, ASTM, or ISO method number, the specimen construction (fiber content, weave, weight), and the test conditions.<\/li>\n<li><strong>For upholstery fire testing<\/strong>, require the certificate to include the foam used in the test combination. A fabric-only fire certificate is insufficient where foam affects the fire classification.<\/li>\n<li><strong>Request Martindale or Wyzenbeek results<\/strong> with the endpoint defined (appearance change, not structural failure) and the specimen construction listed.<\/li>\n<li><strong>For finishing and stain protection<\/strong>, <a href=\"https:\/\/sbifinishing.com\/hospitality-fabric-specification-procurement-checklist\/\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">confirm PFAS-free status in writing<\/a> and request the relevant certificate, particularly for multi-state U.S. programs where state-level PFAS restrictions apply.<\/li>\n<li><strong>Request an accelerated industrial wash-cycle report<\/strong> showing appearance retention after a defined number of cycles \u2014 multiple industrial wash cycles for review and final approval on linens.<\/li>\n<li><strong>Ask for full-width sample panels<\/strong> (not small swatches) and pre-production sample yardage before committing to volume.<\/li>\n<\/ol>\n<blockquote>\n<p><strong>Red flags that should stop a supplier approval:<\/strong><br \/>\nNo independent lab reports at all; test certificates missing specimen construction or foam details for upholstery; vague claims like \u201ccommercial grade\u201d or \u201chotel quality\u201d with no numeric test results; a single summary PDF covering multiple colorways without individual grades.<\/p>\n<\/blockquote>\n<p><strong>Sample request template (paste into RFQ email):<\/strong><\/p>\n<ul>\n<li>Independent lab test report: [AATCC TM61 \/ TM165 \/ ISO 12947 \/ ASTM D4157] \u2014 include method number, specimen construction, and numeric result.<\/li>\n<li>Fire test certificate: include foam combination tested (upholstery) or curtain standard (e.g., NFPA 701 for U.S. applications \u2014 confirm with local code).<\/li>\n<li>PFAS-free finishing certificate (if stain protection is applied).<\/li>\n<li>Accelerated wash-cycle report: multiple industrial wash cycles with appearance grading at intervals.<\/li>\n<li>Full-width sample panel: minimum 1 yard, full width.<\/li>\n<\/ul>\n<h2 id=\"how-does-laundering-chemistry-change-what-you-should-specify\">How does laundering chemistry change what you should specify?<\/h2>\n<p>A fabric\u2019s cleaning code \u2014 W (water-based), S (solvent), or WS (either) \u2014 tells you the compatible cleaning method. It does not tell you whether the fabric will survive the specific chemicals your industrial laundry uses. Hotel housekeeping products typically run at pH 8\u201311, and that alkaline range can degrade topical flame-retardant treatments and back-coatings over time.<\/p>\n<p>Before finalizing any textile specification, get answers to these operational questions:<\/p>\n<ul>\n<li>What detergents and disinfectants does the laundry use? Request Safety Data Sheets (SDS) for each.<\/li>\n<li>What wash temperatures are standard? High-temperature cycles (above 140\u00b0F) accelerate shrinkage and color loss.<\/li>\n<li>Are bleach or quaternary ammonium disinfectants used? Both can void warranties and cause premature colorfastness failure if the fabric was not specified for that chemistry.<\/li>\n<li>How many wash cycles per linen set per week? This determines the realistic cycle count at 12 and 24 months.<\/li>\n<\/ul>\n<p>When a laundry uses harsh chemistry, adjust specs upward on abrasion resistance and require written confirmation that the supplier\u2019s finishing chemistry is compatible with the laundry\u2019s SDS. For high-contact surfaces in F&amp;B areas where <a href=\"https:\/\/thecommercialovenstore.com\/blogs\/news\/the-complete-guide-to-commercial-dishwashers-for-catering-kitchens\" target=\"_blank\" rel=\"noopener\">commercial kitchen operations<\/a> drive heavy soil loads, faux leather or wipe-clean surfaces often deliver better total cost of ownership than fabric upholstery.<\/p>\n<p><strong>Pro Tip:<\/strong> <em>Make chemistry compatibility a contractual requirement, not a verbal assurance. A written sign-off between the textile supplier and the laundry vendor protects both your warranty and your replacement budget.<\/em><\/p>\n<h2 id=\"how-gjergjihtextil-applies-these-kpis-in-hospitality-supply-programs\">How Gjergjihtextil applies these KPIs in hospitality supply programs<\/h2>\n<p>Gjergjihtextil builds KPI documentation into its hospitality proposals from the outset, not as an afterthought. For each product category \u2014 bed linens, towels, upholstery fabrics, curtains \u2014 the company coordinates independent lab testing against AATCC, ASTM, and ISO methods and provides full test certificates with specimen construction details as standard.<\/p>\n<p>Key capabilities relevant to procurement teams:<\/p>\n<ul>\n<li><strong>Dye-lot reservation:<\/strong> For phased hotel projects, Gjergjihtextil reserves dye lots at contract stage and retains control samples from the first delivery for future matching \u2014 eliminating the color-mismatch risk that affects multi-batch refurbishments.<\/li>\n<li><strong>Wash-cycle documentation:<\/strong> Accelerated industrial wash-cycle reports are available on request, showing appearance retention at defined cycle intervals for linens and terry products.<\/li>\n<li><strong>Finishing compatibility:<\/strong> The team confirms cleaning-code compatibility with the property\u2019s laundry chemistry before final specification, reducing the risk of finish degradation under alkaline housekeeping products.<\/li>\n<\/ul>\n<blockquote>\n<p><strong>The practical value of this approach:<\/strong> A hotel project that specifies zone-based abrasion targets and reserves dye lots at contract stage typically extends the visual service life of upholstery and soft furnishings by one to two refurbishment cycles \u2014 reducing replacement frequency and the procurement overhead that comes with it.<\/p>\n<\/blockquote>\n<p>Gjergjihtextil has supplied major international brands including Marriott, Meli\u00e1, and Sheraton, providing a reference base procurement teams can request when evaluating supplier credentials.<\/p>\n<h2 id=\"printable-specification-checklist-for-rfqs-and-contracts\">Printable specification checklist for RFQs and contracts<\/h2>\n<p>Use this checklist as a starting point for every textile RFQ. Fill in the bracketed fields for your property.<\/p>\n<ol start=\"2\">\n<li>Colorfastness to washing: \u2014 AATCC TM61, minimum Grade [4\/4.5] \u2014 certificate per colorway.<\/li>\n<\/ol>\n<p><strong>Acceptance criteria clause (insert into contract):<\/strong><br \/>\n<em>\u201cTextiles are accepted on the basis of appearance retention, not structural failure. Acceptance requires Grade 4 or better on colorfastness and no visible pilling below acceptable level after multiple industrial wash cycles., as confirmed by independent lab report.\u201d<\/em><\/p>\n<h2 id=\"key-takeaways\">Key Takeaways<\/h2>\n<p>Specifying product-level textile performance metrics \u2014 abrasion resistance, colorfastness, pilling, dimensional stability, tensile strength, and laundering performance \u2014 with independent lab evidence is the single most effective way to protect appearance, lifecycle, and procurement budget in hospitality environments.<\/p>\n<table>\n<thead>\n<tr>\n<th>Point<\/th>\n<th>Details<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Insert KPI language into every RFQ<\/td>\n<td>Specify Martindale\/Wyzenbeek rub counts, AATCC colorfastness grades, and shrinkage limits by zone before issuing any purchase order.<\/td>\n<\/tr>\n<tr>\n<td>Require independent lab reports<\/td>\n<td>Full certificates with specimen construction details \u2014 not vendor summaries \u2014 are the minimum standard for procurement sign-off.<\/td>\n<\/tr>\n<tr>\n<td>Match laundry chemistry to specs<\/td>\n<td>Request SDS from your laundry vendor and get written confirmation that the supplier\u2019s finishing chemistry is compatible before final approval.<\/td>\n<\/tr>\n<tr>\n<td>Reserve dye lots on phased projects<\/td>\n<td>Dye-lot reservation at contract stage prevents visible color mismatches when rooms are completed in separate batches.<\/td>\n<\/tr>\n<tr>\n<td>Gjergjihtextil for KPI-backed sourcing<\/td>\n<td>Gjergjihtextil coordinates independent testing, dye-lot continuity, and wash-cycle documentation as part of its hospitality supply proposals.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2 id=\"the-case-for-specifying-visual-service-life-not-structural-failure\">The case for specifying visual service life, not structural failure<\/h2>\n<p>Most procurement teams set abrasion targets based on what a fabric can technically survive. That framing is wrong for hospitality. A lobby chair that structurally holds together at 30,000 Martindale rubs but looks worn and pilled at 20,000 has already failed \u2014 it failed the moment a guest noticed it. The relevant threshold is always the appearance-change point, not the structural-failure point.<\/p>\n<p>The same logic applies to colorfastness. A good pilling resistance wash result is technically a \u201cpass\u201d on some scales, but in a hotel dining room where napkins are laundered daily, good pilling resistance means visible fading within months. Specifying Grade 4 or better or better or better as a hard minimum costs almost nothing at the sourcing stage and saves a full replacement cycle.<\/p>\n<p>Where procurement teams consistently underestimate cost is in phased projects. Specifying a fabric without reserving the dye lot is a decision that looks fine on day one and creates a visible problem on day 300, when the second batch of rooms is completed and the color no longer matches. The fix \u2014 reserving dye lots and retaining control samples \u2014 adds minimal cost and eliminates an entirely avoidable failure mode. Early collaboration between procurement, operations, and the textile supplier is what makes the difference between a specification that works on paper and one that holds up across a full refurbishment cycle.<\/p>\n<h2 id=\"gjergjihtextils-kpi-backed-sourcing-and-specification-support\">Gjergjihtextil\u2019s KPI-backed sourcing and specification support<\/h2>\n<p>Procurement teams that need KPI documentation, independent test coordination, and dye-lot continuity built into their supply program have a direct route through Gjergjihtextil. The company\u2019s hospitality textile offer covers <a href=\"https:\/\/gjergjihtextil.com\/hotels\" target=\"_blank\" rel=\"noopener\">hotel linens, towels, and upholstery fabrics<\/a> with full test certificates, accelerated wash-cycle reports, and written cleaning-compatibility confirmation as standard deliverables \u2014 not optional add-ons.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/csuxjmfbwmkxiegfpljm.supabase.co\/storage\/v1\/object\/public\/blog-images\/organization-24860\/1775118470908_gjergjihtextil.jpg\" alt=\"Gjergjihtextil\"><\/p>\n<p>For restaurant and event venue buyers, dining textile specifications follow the same KPI-backed process: zone-appropriate abrasion targets, colorfastness grades per colorway, and shrinkage data for daily-laundered table linens. Pilot orders are available with sample panels and test documentation included, so you can verify performance before committing to volume. Contact Gjergjihtextil to request a spec review or pilot order for your next project.<\/p>\n<h2 id=\"useful-sources-and-testing-bodies\">Useful sources and testing bodies<\/h2>\n<p>The following organizations and standards are the primary references procurement should cite in RFQs and supplier contracts.<\/p>\n<ul>\n<li><a href=\"https:\/\/www.aatcc.org\/standards\/\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">AATCC<\/a> \u2014 (American Association of Textile Chemists and Colorists): publishes TM61 (colorfastness to laundering), TM79 (absorbency), TM135 (dimensional changes), TM165 (crocking), and TM188 (bleach fastness), among others. Request reports by method number.<\/li>\n<li><a href=\"https:\/\/www.chinesestandard.net\/PDF\/English.amp.aspx\/GBT22800-2023\" rel=\"nofollow noopener noreferrer\" target=\"_blank\">GB\/T 22800-2023:<\/a> \u2014 China\u2019s national standard for tourist hotel textiles, covering towels, bedding, and curtains with laundering, pilling, and dimensional change requirements \u2014 relevant when sourcing from Chinese manufacturers or managing global supply chains.<\/li>\n<\/ul>\n<table>\n<thead>\n<tr>\n<th>Standard body<\/th>\n<th>Key methods for hospitality<\/th>\n<th>Where to find them<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>AATCC<\/td>\n<td>TM61, TM79, TM135, TM165, TM188<\/td>\n<td>aatcc.org\/standards<\/td>\n<\/tr>\n<tr>\n<td>ASTM International<\/td>\n<td>D4157, D3512, D5034, D1683, D3776<\/td>\n<td>astm.org<\/td>\n<\/tr>\n<tr>\n<td>ISO<\/td>\n<td>12947, 12945, 6330, 105-B02<\/td>\n<td>iso.org<\/td>\n<\/tr>\n<tr>\n<td>GB\/T<\/td>\n<td>22800-2023 (hotel textiles)<\/td>\n<td>chinesestandard.net<\/td>\n<\/tr>\n<tr>\n<td>NFPA<\/td>\n<td>701 (drapery\/curtain flame)<\/td>\n<td>nfpa.org<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>When reviewing any test certificate, check that it lists the testing laboratory\u2019s name and accreditation, the exact method number and edition, the specimen construction (fiber, weave, weight), and the numeric result \u2014 not just a pass\/fail notation. A certificate missing any of these fields should be returned to the supplier for a complete version before procurement sign-off.<\/p>\n<h2 id=\"recommended\">Recommended<\/h2>\n<ul>\n<li><a href=\"https:\/\/gjergjihtextil.com\/textile-procurement-hospitality-managers-guide\" target=\"_blank\" rel=\"noopener\">Textile procurement in hospitality: A manager\u2019s guide<\/a><\/li>\n<li><a href=\"https:\/\/gjergjihtextil.com\/en\/why-textile-price-quality-ratio-matters-for-hotels\" target=\"_blank\" rel=\"noopener\">Why Textile Price-Quality Ratio Matters for Hotels<\/a><\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Discover key textile performance indicators essential for hospitality procurement. Ensure products last longer with this expert guide.<\/p>","protected":false},"author":1,"featured_media":10723,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[21],"tags":[],"class_list":["post-10721","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-news"],"_links":{"self":[{"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/posts\/10721","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/comments?post=10721"}],"version-history":[{"count":1,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/posts\/10721\/revisions"}],"predecessor-version":[{"id":10722,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/posts\/10721\/revisions\/10722"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/media\/10723"}],"wp:attachment":[{"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/media?parent=10721"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/categories?post=10721"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gjergjihtextil.com\/en\/wp-json\/wp\/v2\/tags?post=10721"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}